Mitsubishi Electric QD75MH1, Руководство пользователя

Страница: 659 / 834

12 - 102
MELSEC-Q
12 CONTROL SUB FUNCTIONS
(2) Monitor data
•
Md.22
Feedrate
•
Md.27
Current speed
•
Md.28
Axis feed rate
•
Md.33
Target speed
For the above monitoring data,
"
Pr.83 Speed control 10 x multiplier
setting for degree axis
"
is evaluated whether it is valid for each axis. If
valid, unit conversion value is changed ( 10
-3
10
-2
). The unit
conversion table of monitor value is shown below.
R
Md.22 Feed speed/
Md.27 Current speed/
Md.28 Axis feedrate/
Md.33 Target speed
0 : Invalid
Monitor value
Converted from
hexadecimal to
decimal
Unit conversion
Actual value
R 10
n
Unit conversion table
)
Md.22 , Md.27 , Md.28 , Md.33
n
Unit
)
Pr.83 setting
value
degree/min
1 : Valid
3
2
(3) Speed limit value
•
Pr.8
Speed limit value
•
Pr.31
JOG speed limit value
For the speed limit value, " Pr.83 Speed control 10 x multiplier setting for
degree axis" is evaluated whether it is valid for each axis. If valid, the
positioning control will be performed at decuple speed of setting value
(max. speed).
[2] Setting method of "Speed control 10 x multiplier setting for degree
axis function"
Normally, the speed specification range is 0.001 to 2000000.000[degree/min],
but it will be decupled and become 0.01 to 20000000.00[degree/min] by setting
"
Pr.83
Speed control 10 x multiplier setting for degree axis" to valid.
The use the "
Pr.83
Speed control 10 x multiplier setting for degree axis
function", set the parameters shown in the following table.
Buffer memory address
Setting item
Setting
value
Setting details
Axis
1
Axis
2
Axis
3
Axis
4
Pr.83
Speed control 10
x multiplier setting
for degree axis
Set the speed control 10 x multiplier setting for
degree axis.
0: Invalid
1: Valid
63 213 363 513
Refer to Section 5.2.4 "Detailed parameters 2" for details on the setting details.