Mitsubishi Electric QD75MH1, Руководство пользователя

Страница: 625 / 834

12 - 68
MELSEC-Q
12 CONTROL SUB FUNCTIONS
[4] Setting the skip function using an external command signal
The skip function can also be executed using an "external command signal".
The following shows the settings and PLC program example for skipping the
control being executed in axis 1 using an "external command signal".
(1) Set the following data to execute the skip function using an external
command signal.
(The setting is carried out using the PLC program shown below in section
(2)).
Buffer memory address
Setting item
Setting
value
Setting details
Axis
1
Axis
2
Axis
3
Axis
4
Pr.42
External
command function
selection
3 Set "3: Skip request". 62 212 362 512
Cd.8
External
command valid
1 Set "1: Validate external command". 1505 1605 1705 1805
Refer to Section 5.7 "List of control data" for details on the setting details.
(2) Add the following PLC program to the control program, and write it to the
PLC CPU.
Skip function
selection command
<Select skip request>
<Set external command valid>
K1 K3 K62 H0 TOP
K1 K1 K1505 H0 TOP
Skip request
External command valid
Input external command signal
Example