Mitsubishi Electric PUHY-200YMF-C, Руководство по обслуживанию

Страница: 57 / 166

–56–
3) Method of deletion
• Deletion of group registration information of indoor unit ...................................... 4
[Operation procedure]
1 With the remote controller under stopping or at the display of “HO”, continuously press the
FILTER
+
switch (
A
+
B
) at the same time for 2 seconds to change to the registration mode.
2
Press the switch (
E
) to display the indoor unit address registered. (As same as
2
)
3
In order to delete the registered indoor unit being displayed on the remote controller, press the
CLOCK
→
ON
→
OFF
(
F
) switch
two times continuously. At completion of the deletion, the attribute display section will be shown as “ – – “.
(See figure below.)
Note: Completing the deletion of all indoor units registered on the remote controller returns to “HO” display.
4 After completing the registration, continuously press the
FILTER
+ switch (
A
+
B
) at the same time for 2
seconds to change to the original ordinary mode (with the remote controller under stopping).
ERROR CODE
OA UNIT ADDRESS NO
˚C
INDOOR UNIT
ADDRESS NO
ERROR CODE
OA UNIT ADDRESS NO
˚C
INDOOR UNIT
ADDRESS NO
ERROR CODE
OA UNIT ADDRESS NO
˚C
1
Set the address 2 Press the switch for
confirmation (
E
)
• Registered
• No registration
* Same display will appear when
the unit of “007” is not existing.
1 Press the switch for confirmation (
F
)
twice continuously.
• Deletion completed
• Deletion completed
In case group re-
gistration with other
indoor unit is existing
In case no group
registration with other
indoor unit is existing
▲
▼
1
1
▼
▲
1 + 2
“– –” indicates the
deletion completed.
˚C
˚C
(Alternative
display)
˚C
˚C
(Alternative
display)
INDOOR UNIT
ADDRESS NO
ERROR CODE
OA UNIT ADDRESS NO
˚C
2
ON/OFF
TEMP
FILTER
CHECK TEST
ON OFF CLOCK
PAR-F27MEA
TIMER SET
ON/OFF
TEMP
FILTER
CHECK TEST
ON OFF CLOCK
PAR-F27MEA
TIMER SET