7
GB
2SHUDWLRQ
Ŷ
$ERXWWKHRSHUDWLRQPHWKRGUHIHUWRWKHRSHUDWLRQPDQXDOWKDWFRPHVZLWKHDFKUHPRWHFRQWUROOHU
7XUQLQJ212))
>21@
>2))@
Press the [ON/OFF] button.
The ON/OFF lamp will light up in
green, and the operation will start.
Press the [ON/OFF] button again.
The ON/OFF lamp will come off,
and the operation will stop.
Ŷ
2SHUDWLRQVWDWXVPHPRU\
Remote controller setting
Operation mode
Operation mode before the power was turned off
Preset temperature
Preset temperature before the power was turned off
Fan speed
Fan speed before the power was turned off
Ŷ
6HWWDEOHSUHVHWWHPSHUDWXUHUDQJH
Operation mode
Preset temperature range
Cool/Dry
19 ~ 30 ºC
Heat
17 ~ 28 ºC
Auto (Single set point)
19 ~ 28 ºC
Auto (Dual set points)
[Cool] Preset temperature range for the Cool mode
[Heat] Preset temperature range for the Heat mode
Fan/Ventilation
Not settable
1RWH
(YHQLI\RXSUHVVWKH212))EXWWRQLPPHGLDWHO\DIWHUVKXWWLQJGRZQWKHRSHUDWLRQLVSURJUHVVWKHDLUFRQGLWLRQHUZLOOQRWVWDUWIRUDERXWPLQXWHV
7KLVLVWRSUHYHQWWKHLQWHUQDOFRPSRQHQWVIURPEHLQJGDPDJHG
0RGH6HOHFWLRQ
Press the [F1] button to go through the op-
eration modes in the order of “Cool”, “Dry”,
“Fan”, “Auto”, and “Heat”. Select the desired
operation mode.
Cool
Dry
Fan
Auto
Heat
Operation modes that are not available
to the connected outdoor unit models will
not appear on the display.
:KDWWKHEOLQNLQJPRGHLFRQPHDQV
The mode icon will blink when other indoor units in the same refrigerant
system (connected to the same outdoor unit) are already operated in a
different mode. In this case, the rest of the unit in the same group can
only be operated in the same mode.
7HPSHUDWXUHVHWWLQJ
&RRO'U\+HDWDQG$XWRVLQJOHVHWSRLQW!
Cool
Room
28.5
Auto
Set temp.
Mode
Temp.
Fan
Fri
28.5
Example display
(Centigrade in 0.5-degree increments)
F1
F2
F3
F4
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
Press the [F2] button to decrease the preset temperature, and press the
[F3] button to increase.
5HIHUWRWKHWDEOHRQSDJHIRUWKHVHWWDEOHWHPSHUDWXUHUDQJHIRUGLI
-
ferent operation modes.
3UHVHWWHPSHUDWXUHUDQJHFDQQRWEHVHWIRU)DQ9HQWLODWLRQRSHUDWLRQ
3UHVHWWHPSHUDWXUHZLOOEHGLVSOD\HGHLWKHULQ&HQWLJUDGHLQRU
1-degree increments, or in Fahrenheit, depending on the indoor unit
model and the display mode setting on the remote controller.
$XWRPDWLFRSHUDWLRQVLQJOHVHWSRLQW
Ŷ
According to a set temperature, cooling operation starts if the room
temperature is too hot and heating operation starts if the room
temperature is too cold.
Ŷ
During automatic operation, if the room temperature changes and
remains 1.5 °C or more above the set temperature for 3 minutes, the
air conditioner switches to cool mode. In the same way, if the room
temperature remains 1.5 °C or more below the set temperature for
3 minutes, the air conditioner switches to heat mode.
Cool mode
3 minutes (switches
from heating to cooling)
Set tempe1.5°C
Set temperature
Set temperature -1.5°C
3 minutes (switches
from cooling to heating)
Ŷ
Because the room temperature is automatically adjusted in order to
maintain a fixed effective temperature, cooling operation is performed
a few degrees warmer and heating operation is performed a few
degrees cooler than the set room temperature once the temperature is
reached (automatic energy-saving operation).
$XWRGXDOVHWSRLQWPRGH!
Preset temperature
for cooling
Preset temperature
for heating
1
The current preset temperatures will appear. Press the [F2] or [F3]
button to display the Settings screen.
F1
F2
F3
F4
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
7KHVHWWDEOHWHPSHUDWXUHUDQJHYDULHVZLWKWKHPRGHORIRXWGRRUXQLWVDQGUHPRWHFRQWUROOHU