Mitsubishi Electric Netcom 2 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 56

background image

Mitsubishi Netcom User Manual

Rev 3 02/24/2009

30

6. Follow the installation prompts to install the software.
7. Following the completion of the installation, the files will be installed but the
service will need to be started.
Perform the following steps to configure and start the remote shutdown agent:

Starting and Configuring the Remote Agent Service:

1. Open a command terminal.
2. While logged in as root, run the following command:

/etc/DevMan setup

3. The script will now ask you questions about configuring the software.
4. The setup will ask you to specify the IP address of the Netcom. Leave this
address blank if you want to allow any Netcom to manage the shutdown agent.
5. The DevMan script has other useful options. Rut it without the

setup

argument

to see the Usage line.

Perform the following steps to uninstall the remote shutdown agent:

1. Open a command terminal.
2. Go to the location where you unzipped the DiamondLinkRAX.X-OSX.tar.gz
file during the installation.
3. Go into the DiamondLinkRAX.X-OSX folder that was created.
4. Run the following command:

./Uninstall

8.2 Configuring the Remote Shutdown Agents from the Netcom

Select the

Shutdown Setup

menu option from the Netcom user interface to

configure the Netcom to shut down remote computers.

9 Netcom Forwarder

The Netcom is limited to shutting down 24 remote computers. If there is a need to

shut down additional computers, you can use the Netcom Forwarder to do so. The
Netcom Forwarder is purchased as a separate software product. Contact Mitsubishi or
your Netcom vendor to purchase this software. The Netcom Forwarder will run on
Windows XP Professional, Windows 2000 or Windows 2003.

9.1 Installing and Configuring the Forwarder Agent
Perform the following steps to install the Forwarder Agent:

1. Insert the CD. The installation will start automatically. Reply to the standard
prompts.
2. Configure the forwarder to communicate with the Netcom. Enter the IP address
of the Netcom and check the Netcom box.

9.2 Configuring the Netcom to send shutdown messages to the Forwarder Agent

Perform the following steps to configure the Netcom to send alarms to the
Forwarder Agent:
1. Browse to the Netcom and select the

Shutdown Setup

menu option.

«
...
30
31
32
33
34
...
»

Содержание Netcom 2

























































Отзывы:

Нет отзывов

Похожие инструкции для Netcom 2

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 24

SLC ELITE MAX Series

Бренд: Salicru Страницы: 40

Бренд: PARUS Страницы: 75

Бренд: CyberPower Страницы: 2

Бренд: Eaton Страницы: 4

Бренд: CyberPower Страницы: 4

93PM G2 100(200)

Бренд: Eaton Страницы: 141

Бренд: Powervar Страницы: 44

Бренд: Xtreme Power Conversion Страницы: 66

Бренд: Borri Страницы: 226

PowerWAVE 9500DPA

Бренд: Kohler Страницы: 85

sonnenProtect 2500-AU-ATS

Бренд: Sonnen Страницы: 27

Trace 512 UR-UPS

Бренд: Xantrex Страницы: 72

Бренд: Falcon Страницы: 24

USHA IX900 Series

Бренд: Falcon Страницы: 66

SPS SOHO+ series

Бренд: Salicru Страницы: 20

Бренд: Lenovo Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды