67
˚
F
˚
C
˚
C
TIME SUN
Function Selection of
remote controller
Set Day/Time
Standard Control Screens
OFF
ON
TIME SUN
Day of the Week Setting
Time Setting
2
3
4
˚
C
˚
C
TIME SUN
ON/OFF
TEMP.
Day of the
Week & Time
display
1
9
4
2
1
˚
C
˚
C
ON/OFF
TEMP.
1
1
<Screen confi guration>
For details on setting the language for the remote controller dis-
play, refer to 4.6. Function Selection.
The initial language setting is English.
●
Function Selection of remote controller:
Set the functions and ranges available to the
remote controller (timer functions, operating
restrictions, etc.)
●
Set Day/Time:
Set the current day of the week or time.
●
Standard Control Screens:
View and set the air conditioning system’s
operating status
<How to change the screen>
A
: Hold down both the Mode button
2
and the Timer On/Off
button
9
for 2 seconds.
B
: Press either of the Set Time buttons ( or )
1
.
c
: Press the Mode button
2
.
4.2 Setting the day of the week and time
1. Press the or Set Time button
1
to show display
2
.
2. Press the Timer On/Off (Set Day) button
9
to set the day.
*
Each press advances the day shown at
3
:
Sun
→
Mon
→
...
→
Fri
→
Sat.
3. Press the appropriate Set Time button
1
as necessary to set
the time.
*
As you hold the button down, the time (at
4
) will increment
first in one-minute intervals, then in ten-minute intervals,
and then in 1-hour intervals.
4. After making the appropriate settings at Steps 2 and 3, press
the
button
4
to lock in the values.
Note:
The day and time will not appear if clock use has been disa-
bled at Function Selection of remote controller.
4.3 Operation
Available items are different depending on your system.
(Refer to section 3.)
4.3.1 Switching
<To Start Operation>
■
Press the ON/OFF button
1
.
• The ON lamp
1
and the display area come on.
Note:
When the unit restarts, the previous settings are recalled as
follows.
Remote controller setting
Mode
Last operation mode
Temperature setting
Last set temperature
<To Stop Operation>
■
Press the ON/OFF button
1
again.
• The ON lamp
1
and the display area go dark.
Note:
Even if you press the ON/OFF button to restart the system
while turning down the operation, the outdoor unit will not
start for about 3 minutes.
This is to prevent the internal components from being dam-
aged.
Содержание Mr.SERVICE PUHZ-HRP100VHA2
Страница 95: ...95 ...
