Mitsubishi Electric Mr.SERVICE PUHZ-HRP100VHA2, Техническое руководство

Страница: 16 / 96

16
+
In this system,
• Heating ECO mode of FTC is
not available.
• It is NOT necessary to switch
operation mode to realize
Hot water mode, Anti freeze
mode and Heating ECO mode.
Simply change the target temp.
by Analog signal.
‘Target flow temperature’ is set…
By remote controller
By remote controller
Your system is
BASIC SYSTEM.
Your system is
SIMPLE SYSTEM.
Your system is ANALOG TEMP. SYSTEM.
Remote controller
FTC PCB BOX FTC PCB BOX FTC PCB BOX
Remote controller
System controller
(locally supplied)
SIMPLE SYSTEM BASIC SYSTEM ANALOG TEMP. SYSTEM
ON/OFF
Operation mode
Operation mode
- Heating
- Heating ECO
- Hot water
- Anti freeze
- Cooling
Operation mode
- Heating
+
- Cooling
Target flow temp.
Target flow temp.
Target flow temp.
ON/OFF
Remote controller
ON/OFF
By Non-voltage
Contact signals By Non-voltage
Contact signals
End user interface
End user interface
System controller
(locally supplied)
End user interface
To preset
- target temp. for each mode
- target temp. parameters
To preset
- analog signal parameters
Analog signal
4-20mA/1-5V/0-10V
Heat Pump switch ON/OFF
and the operation mode
change is done…
By external signals from local controller
(non-voltage contact signals)
By external signals from local controller
(Analog signal:4-20mA/ 1-5V/ 0-10V)
(FTC)
(FTC)
(FTC)
By our FTC
FTC