Mitsubishi Electric MR-J5D, Руководство пользователя

Страница: 120 / 194

118
6 OPTIONS AND PERIPHERAL EQUIPMENT
6.1 Cables/connector sets
Ethernet cable
For Ethernet cables used for network wiring, refer to "Communication specifications" in the User's Manual (Communication
Function).
A commercially available product example is as follows.
For commercially available cables other than the above, refer to the CC-Link Partner Association website.
https://www.cc-link.org/en/
Precautions
• When branching the CC-Link IE TSN network using a switching hub, use a switching hub (Class B) that is recommended by
the CC-Link Partner Association. Although a switching hub (Class A) can also be used, there are restrictions on the type of
topology that can be used. For further information, refer to "MELSEC iQ-R Motion Module User's Manual (Startup)".
• When branching the CC-Link IE Field Network Basic network using a switching hub, use a hub with a transmission speed of
100 Mbps or higher. For switching hubs that do not have the auto-negotiation function, set the transmission speed to 100
Mbps and half-duplex.
Product name Model Specifications
Ethernet cable For indoor use SC-E5EW-S_M _: cable length (0.5 m, 1 to 100 m (unit: 1 m)) Double shielded cable (category
5e)
For moving parts
(indoor use) SC-E5EW-S_M-MV _: cable length (0.1 m, 0.2 m, 0.3 m, 0.5 m, 1 to 45 m
(unit: 1 m))
For indoor/outdoor
use SC-E5EW-S_M-L _:cable length (1 to 100 m (Unit: 1 m))