Mitsubishi Electric MELSERVO-J2M series, Инструкция по эксплуатации

Страница: 187 / 197

www.dadehpardazan.ir 88594014-15
13 - 1
13. ABSOLUTE POSITION DETECTION SYSTEM
13. ABSOLUTE POSITION DETECTION SYSTEM
CAUTION
If an absolute position erase (A.25) or an absolute position counter warning (A.E3)
has occurred, always perform home position setting again. Not doing so can cause
runaway.
13.1 Features
For normal operation, as shown below, the encoder consists of a detector designed to detect a position
within one revolution and a cumulative revolution counter designed to detect the number of revolutions.
The absolute position detection system always detects the absolute position of the machine and keeps it
battery-backed, independently of whether the servo system controller power is on or off.
Therefore, once home position return is made at the time of machine installation, home position return is
not needed when power is switched on thereafter.
If a power failure or a fault occurs, restoration is easy.
Also, the absolute position data, which is battery-backed by the super capacitor in the encoder, can be
retained within the specified period (cumulative revolution counter value retaining time) if the cable is
unplugged or broken.
Servo system controller
Current
position
Home position data
LS0
CYC0
MELSERVO-J2M
Position data
MR-J2M-BT
Battery
unit
Detecting
the number
of revolutions Detecting the
position within
one revolution
Posit
io
n
contr
o
l
sp
eed
con
trol
High speed serial
communication
Servo motor
1 pulse/rev accumulative revolution counter
Super capacitor
Within one-revolution counter