Mitsubishi Electric MELSEC iQ-RD77GF16, Руководство пользователя

Страница: 93 / 116

APPX
Appendix 1 Component List of the RD77MS
91
A
Serial absolute synchronous encoder cable
Generally use the serial absolute synchronous encoder cables available as our products. If the required length is not found in
our products, fabricate the cable by a customer side.
■
Selection
The following table indicates the serial absolute synchronous encoder cables used with the serial absolute synchronous
encoder. Connector sets (MR-J3CN2) are also available for your fabrication.
Use the following or equivalent twisted pair cables as the serial absolute synchronous encoder cables.
*1 d is as shown below.
*2 Standard OD (Outside Diameter). Maximum OD is about 10% larger.
Cable model Cable length [m (ft.)] Wire model
Q170ENCCBL_M-A 2 (6.56), 5 (16.40), 10 (32.81), 20 (65.62),
30 (98.43), 50 (164.04) J14B103715-00 12 pairs (BLACK)
Connector sets type Description
MR-J3CN2 Servo amplifier connector
Wire model Core size
[mm
2
]
Number
of cores Characteristics of one core Finished
OD [mm]
*2
Structure
[Number of wires/
mm] Conductor
resistance [

/km]
Insulating sheath OD
d [mm]
*1
J14B103715-00 12 pairs
(BLACK) 0.2 24 (12 pairs) 40/0.08 105 or less 0.88 9.0
CAUTION
• When fabricating the encoder cable, do not make incorrect connection. Wrong connection will cause runaway or explosion.
Conductor Insulation sheath
d