Mitsubishi Electric ME96-SSE-MB, Руководство пользователя

Страница: 28 / 66

- 27 -
3.Setting
3.9 Setting Menu 8:Special Settings (Setting Operation Time, Phase Display, IEC Mode)
Set the operation time, phase display, IEC mode.
In the operation mode, press and simultaneously for 2 seconds or more, and the following operation becomes
available.
For more details about each function, refer to the corresponding pages.
Operation time
⇒
page 43, IEC mode
⇒
page 41
Set “on or off” of the Operation time display that integrates
the time while the target for counting is input and display
it as the load Operation time.
①
Operation time
display
ｏＦＦ ｏｎ
（
Not displayed
） （
Displayed
）
Set the setting menu number to “8”.
(as shown in the right figure)
Setting menu
SET RESET
SET DISPLAY
SET DISPLAY
SET DISPLAY
SET DISPLAY
Select the target for counting Operation time from
the auxiliary power, current, and voltage.
Item 3-phase 4-wire 1-phase 2-wire Others
AUX AUX AUX AUX
A A
AVG
A A
AVG
V V
AVG
（
L-N
）
V V
AVG
（
L-L
）
②
Target for counting
Operation time
setting
（
Auxiliary power
） （
Current
） （
Voltage
）
AUX A V
Set the target for counting Operation time threshold.
When the auxiliary power (AUX) is selected for the Operation time,
this display will be skipped.
（
1
）
When current is set target for counting Operation time.
（
2
）
When voltage is set target for counting Operation time.
③
Operation time
threshold
min 1 to 120%
（
Setting step 1%
）
min 20 to 120%
（
Setting step 1%
）