Mitsubishi Electric ME96-SSE-MB, Руководство пользователя

Страница: 24 / 66

- 23 -
3. Setting
3.6 Setting Menu 5: Alarm Settings (Setting Upper/Lower Limit Alarm, Motor Starting Current
Mask Function.)
This section shows how to set the upper/lower limit alarm, backlight flickering during alarm, motor starting current delay time, and
pulse output.
In the operation mode, press and simultaneously for 2 seconds or more, and the following operation becomes
available.
For more details about each function, refer to the corresponding pages.
U
pper/lower limit alarm → Page
s 42 and 43
, Motor startup current → Page
44
Set the Alarm item 1 to be allowed to measurement items.
The upper/lower limit measurement values can be monitored by this setting.
（ 1 ）
For 3-phase 4-wire
（ 2 ）
For other phase wire system except 3-phase 4-wire
①
Alarm item 1
Note 1. Measurement items that are not selected in the display pattern can be selected.
Note 2. V (L-N): Phase to neutral voltage, V (L-L): phase to phase voltage
Display when "non"
is selected
Display when
"A upper limit" is
selected
non
A upper limit
A lower limit
AN upper limit
V (L-N) upper limit
V (L-N) lower limit
V (L-L) upper limit
V (L-L) lower limit
W upper limit
W lower limit
PF upper limit
PF lower limit
Hz upper limit
Hz lower limit
non
A upper limit
A lower limit
V upper limit
V lower limit
W upper limit
W lower limit
PF upper limit
PF lower limit
Hz upper limit
Hz lower limit
Set the setting menu number to “5”.
(as shown in the right figure)
Setting menu
SET DISPLAY
SET DISPLAY
SET RESET