90
Appendices
Appendix F: Troubleshooting, continued
NetCommand IR Control
Symptom
Remarks
5.
There is no sound or picture from the A/V receiver
for my DVD player or other device connected to the
A/V receiver; the A/V receiver should be sending
video to the TV over an HDMI cable. (A/V Receiver
Set Up for Audio and Video Switching over HDMI)
NetCommand A/V receiver setup is not switching audio and video
inputs properly. See “Setup to Control Automatic Audio and Video
Switching via HDMI,” page 65.
6.
I’ve selected my DVD player or other surround
sound device in combination with the TV speakers
but hear no sound from the TV speakers.
A/V Receiver Set Up for Audio-Only Switching
•
If you have only an audio connection from the device to the A/V
receiver, a physical audio connection from the device to the TV is
also required.
Connect the left and right audio output from the device to the
-
appropriate TV audio input. Now you can hear audio from
the device through either the TV speakers or the A/V receiver.
To switch audio sources, press AUDIO, press
-
to show
the Speakers option, then press to select AV Receiver or
TV.
A/V Receiver Set Up for Audio and Video Switching over HDMI
•
With your DVD player connected to the A/V receiver, only
video is passed from the A/V receiver to the TV because of
copy-protection restrictions on the HDMI signal
7.
I “learned” the RECORD key for my VCR/DVR but
when I pressed the RECORD key, the VCR/DVR
did not record anything.
Check that the VCR or DVR is receiving a signal directly from your
cable box or satellite receiver.
LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY, ANY
EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH SUPPLIERS,
INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE.
Manufactured under license from 1Limited. Worldwide patents applied for.
CableCARD™ is a trademark of Cable Television Laboratories, Inc.
FlashFX ProT is a trademark of Datalight, Inc. Datalight® is a registered trademark of Datalight, Inc. Copyright 1989-2008
Datalight, Inc., all rights reserved.
Manufactured under license from Dolby Laboratories. “Dolby” and “Pro Logic” are trademarks of Dolby Laboratories.
GalleryPlayer
®
and the GalleryPlayer logo are either registered trademarks or trademarks of GalleryPlayer, Inc., in the United
States and/or other countries.
HDMI™ the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
The software in this TV is based in part on the work of the Independent JPEG Group, copyright © 1991-1998, Thomas G. Lane, all
rights reserved.
The
logo and the words “Simplay™” and “Simplay HD™” are the trademarks of Silicon Image, Inc.
In the United States, TV Guide and other related marks are registered marks of Gemstar-TV Guide International, Inc. and/or one of
its affiliates.
The TV Guide Daily system is manufactured under license from Gemstar-TV Guide International, Inc. and/or one of its affiliates.
The TV Guide Daily system is protected by one or more of the following United States patents 6,498,895; 6,850,693; 6,396,546;
5,940,073; 6,239,794 to Gemstar-TV Guide International, Inc. and/or its subsidiaries.
Gemstar-TV Guide International, Inc. and/or its related affiliates are not in any way liable for the accuracy or availability of the program
schedule information or other data in the TV Guide Daily system and cannot guarantee service availability in your area. In no event shall
Gemstar-TV Guide International, Inc. and/or its related affiliates be liable for any damages in connection with the accuracy or availability
of the program schedule information or other data in the TV Guide Daily system.
x.v.Color
and the
x.v.Color
logo are trademarks of Sony Corporation.
ChannelView™, DeepField™ Imager, Easy Connect™, NetCommand®, PerfectColor™, Plush 1080p®, QuickView™, SharpEdge™,
Smooth120Hz™ are trademarks of Mitsubishi Digital Electronics America, Inc.
Trademark and License Information
