84
Appendices
Appendix F:
Troubleshooting
Reset Name
When to Use
How to Use
Resulting Action
Format
When the picture
shape seems incorrect,
use
FORMAT
to change
the shape of the
picture.
Press the
FORMAT
key to cycle through
the available formats to find the best
format for the current picture.
The last-used format for a signal
type is memorized for each input.
The next time the same input and
the same signal type is viewed,
the last-used format will be
recalled.
PerfectColor
™
Reset
(for the single
input currently
being watched)
)
When the color intensities
seem out of balance, use
the PerfectColor reset to
reset the color balances
to the original factory
settings.
While viewing the input to be
1.
reset, press
MENU
to display the
Main
menu with the A/V icon
highlighted.
Use
2.
to highlight
PerfectColor
and press
ENTER
to display the
PerfectColor adjustment screen.
Press
3.
CANCEL
to reset the colors.
All PerfectColor sliders are reset
to the original center position. The
PefectColor settings for other inputs
remain unchanged.
A/V Memory
Reset
(for the single
input currently
being watched)
When audio and/
or video settings for
a single input seem
incorrect, use A/V
Memory Reset to
return the input to
the original factory
settings.
While viewing the input to be
1.
reset, press
MENU
to display the
Main
menu with the A/V icon
highlighted.
Use
2.
to highlight the
Reset
icon and press
ENTER
to reset.
All Audio and Video settings
for the individual input are
reset except for the Listen To,
Language, audio Balance, and
Closed Caption settings.
A/V Reset
(for all inputs)
To reset audio and
video adjustments for
all inputs to the original
factory settings.
While viewing the TV, press the
control-panel buttons
GUIDE
and
FORMAT
at the same time.
All Audio and Video settings are
returned to the original factory
settings, including Listen To and
Language, plus Closed Captions
settings and Format settings.
Channel
Memorization
To erase and
re-memorize channels
on
ANT 1
or
ANT 2
.
While viewing the TV, press
1.
MENU
to display the
Main
menu.
Press
2.
to highlight the
Setup
icon.
Press
3.
to highlight the
Scan
icon.
Press
4.
to highlight the antenna
input and reception mode, e.g.
Ant 1 Air
.
Press
5.
to highlight the
Start
button icon and press
ENTER
to
start the memorization.
All previously memorized chan-
nels for the selected antenna
input are erased and a new
set of memorized channels is
created. All custom settings for
Fav, channel names, and channel
locks are deleted. To add or
delete individual channels, see
Edit
menu instructions on page
47.
Lock Menu
Pass Code
To change your
Lock
menu pass code
See the cutout page in Appendix A,
page 67.
Allows a new code to be
established.
TV Reset Comparison Guide
You can resolve many common TV problems using
the reset functions described in the following table.
See also the troubleshooting suggestions later in this
appendix.
IMPORTANT
Before you change sound or picture settings:
If
picture or sound settings seem wrong for a broadcast
channel (a channel from
ANT 1
,
ANT 2
, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
