background image

 

5.  TV Menus 

43

Audio Menu 

To make audio adjustments:

From the Audio menu:

• 

 

Press 

1. 

   to highlight an option

Press 

2. 

    to display the submenu and adjust.

Press 

3. 

MENU

 to return to the 

AV

 menu.

While watching TV:

• 

  Press the 

AUDIO

 key repeatedly 

to display the audio option you want to change.  
Press      to change settings.

AV menu, Audio options

Audio Menu Options

Speakers

The 

Speakers

 option displays only if an A/V receiver connection has been identified.  The setting 

you select is applied to all TV inputs.

Note:

  If you disconnect an analog A/V receiver, be sure to change the 

Speakers

 setting to 

TV

 to 

hear sound from the TV speakers.

TV

Turns on the internal TV speakers.

AV Receiver

Turns off the TV speakers so you hear sound only from a connected A/V receiver.

Subwoofer

Off

On

The 

Subwoofer

 option displays only if a subwoofer connection has been identi-

fied on the 

SUBWOOFER OUTPUT

 jack.  The setting you select is applied to all TV 

inputs.
Use 

Off

 to turn off audio to a connected subwoofer or to reset the 

AVR AUDIO 

OUTPUT

 jack.  See the reset instructions on page 16.

[Subwoofer 
level adjust-
ment]

To adjust the subwoofer volume level, highlight 

Subwoofer

 and press 

ENTER

 to 

display an adjustment slider.  Adjust the level to your preference.

Bass

Controls volume level of low-frequency sound from the TV speakers.

Treble

Controls volume level of high-frequency sound from the TV speakers.

Balance

Controls audio balance between the right and left TV speakers.  Available only when Sound Mode 
is 

Stereo

.

Содержание LT-52149

































































































Отзывы: