PPO TYPE SUPPORT SPECIFICATION
47
7
PZD
Name
Bit
Definition
STW
—
0 to 2
Not used (1 is set)
Control enable
3
0: Inverter output shutoff, 1: Inverter output shutoff is cancelled
—
4 to 6
Not used (1 is set)
Fault reset
(Reset)
7
[At inverter error]
0: No action
1: Fault reset (Reset).
The operation depends on the
Pr.349
setting. (Refer to
)
[When inverter is normal]
No action
—
8
Not used (0 is set)
—
(Standard format)
9
Not used (0 is set)
REF1 enable
(Extended format)
9
0: REF1 disabled, 1: REF1 enabled (The REF1 setting is applied to the inverter.)
PZD enable
10
0: Command request of PZD is not processed.
1: Command request of PZD is processed.
At power-on or inverter reset, set 1 once.
STF signal
11
0: OFF, 1: ON (forward rotation command)
STR signal
12
0: OFF, 1: ON (reverse rotation command)
Terminal RT function
13
The function assigned to the terminal RT
is activated.
MRS signal
14
0: OFF, 1: ON (output is shut off)
RAM/EEPROM
15
0: Set frequency (HSW) is written to RAM (Power-on reset returns the changed
set frequency to the setting before it was written to RAM.).
1: Set frequency (HSW) is written to EEPROM.
Содержание FR-A8NP
Страница 7: ...6 MEMO ...
