- 12 -
7.2.4 Logging setup
－
the settings for the logging ID
（
Set only EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB connected the EMU4-LM.
）
Screen
Operation
Note
1 Transition to the setup mode
1-1.
（
1
）
Push the Setup key in operation mode.
（
2
）
1-1 will be displayed.
（
1
）
Confirm that the cursor focuses the “4
Logging”, and push the / Phase
key.
（
2
）
2-1 will be displayed.
2 Setup the logging unit ID
（
EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB
）
2-1.
（
1
）
In 2-1,
Push the
▲
or
▼
key, and move the cursor to the ”1 ID”.
（
2
）
Push the
/ Phase key.
（
3
）
2-2 will be displayed.
[ID]
：
001
～
255
2-2.
（
1
）
Push the
▲
▼
＋
－
key
, and change the logging unit ID.
（
2
）
Push the
/ Phase key. Confirm the setting value.
（
3
）
2-1 will be displayed.
3
Save the settings
3-1.
（
1
）
After setting all of the items, push the Setup key.
（
2
）
3-1 will be displayed.
（
3
）
When save the settings,
push the
▲
or
▼
key, move the cursor to
the “1 Save”, and Push the
/ Phase key.
（
4
）
After completing the settings saving,
“
Completed” message will be
displayed.
Push the
/Phase key.
（
5
）
Return to the operation mode, and it will be displayed electric energy screen.
1 Save
→
Save settings and return to
the operation mode.
2 Not Save
→
Discard the changes and
return to the operation mode.
3 Cancel
→
Continue the setup.
*If you change a settings, please push the
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
*The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
*If you want to set the other circuit, push the Circuit key on the "Setup" screen (1-1), select the circuit, make the setting.
7.2.5 Clock setup
－
the settings for the clock.
（
Set only EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB connected the EMU4-LM
）
Screen
Operation
Note
1 Transition to the setup mode
1-1.
（
1
）
Push the Setup key in operation mode.
（
2
）
1-1 will be displayed.
（
1
）
Confirm that the cursor focuses the “5
Clock”, push the
/ Phase key.
（
2
）
2-1 will be displayed.
2 Clock Setup
（
EMU4-BM1-MB, EMU4-HM1-MB, EMU4-LG1-MB
）
2-1.
2-2.
（
1
）
In 2-1, Push the
▲
or
▼
key
, and move the cursor to the
“
Year
”
.
（
2
）
Push the
＋
or
－
key. Change the set value.
（
3
）
Push the
▼
key, and move the cursor to the
“
Month
”
.
（
4
）
Push the
＋
or
－
key. Change the set value.
（
5
）
In a similar way,
change the
“
Day
”
,
“
Hour
”
,
“
Minute
”
.
Note 1
（
6
）
After setting all of the items,
push the
▲
or
▼
key, and move the
cursor to the ”OK”.
（
7
）
Push the
/ Phase key, and clock
setting changed.
Note 2
（
8
）
2-2 will be displayed.
（
9
）
When to exit the clock
setup,
push the
＋
or
－
key, and move the cursor
to the ”OK”, and push the
/ Phase key.
（
If select the ”Cancel”, return to 1-1
）
（
10
）
After completing the settings saving, and 1-1 will be displayed.
[Year]
：
00
⇔
01
⇔
02
⇔
…
⇔
13
⇔
…
⇔
99
⇔
[Month]
：
01
⇔
02
⇔
03
⇔
04
⇔
…
⇔
12
⇔
[Day]
：
01
⇔
02
⇔
…
⇔
29
⇔
30
⇔
31
⇔
[Hour]
：
00
⇔
01
⇔
…
⇔
12
⇔
13
⇔
…23
⇔
[Minute]
：
00
⇔
01
⇔
…
⇔
59
⇔
Note 1
：
The setting range of the day changes with
setting in the year and the month.
Note 2
：
It becomes “00” second when thetiming of
pushing the
/Phase
key atthe clock
setup screen.
Note 3
：
The logging data stored in EMU4-LM is
deleted if clock setting is changed. Measured
data stored in SD card is not deleted.
*If change a settings, please push the
/ Phase key and be sure to determine changes. If without determine, the changes will be discarded.
*
The underline means the default of setting. After you have been set, even if a power failure occurs does not disappear setting.
*If you want to set the other circuit, push the Circuit key on the "Setup" screen (1-1), select the circuit, make the setting.
7.2.6 Display setup
－
Setup about display such as LCD contrast or backlight lighting pattern.
Screen
Operation
Note
1 Transition to the setup mode
1-1.
（
1
）
Push the Setup key in operation mode.
（
2
）
1-1 will be displayed.
（
1
）
Confirm that the cursor focuses the “6
Display”, push the
/ Phase key.
（
2
）
2-1 will be displayed.
2 Setup the LCD contrast
2-1.
（
1
）
In 2-1, push the
▲
or
▼
key, and move the cursor to the “1 Contrast”.
（
2
）
Push the
/ Phase key.
（
3
）
2-2 will be displayed.
[
Contrast
]
：
■□□□□□□□⇔
■■□□□□□□⇔
■■■□□□□□⇔
■■■■□□□□⇔
■■■■■□□□⇔
■■■■■■□□⇔
■■■■■■■□⇔
■■■■■■■■
2-2.
（
1
）
Push the
＋
or
－
key, and change the LCD contrast value.
（
2
）
Push the
/ Phase key.
（
3
）
2-1 will be displayed.
3 Setup the backlight
3-1.
（
1
）
In 3-1, push the
▲
or
▼
key, and move the cursor to the
“
2 Backlight
”
.
（
2
）
Push the
/ Phase key.
（
3
）
3-2 will be displayed.
[Backlight]
：
Auto OFF
⇔
Always ON
Auto OFF…If 5 minute has passed since the last key
operation, backlight will
be OFF
automatically. There areany key operation,
backlight wll be lighted again.
Always ON…Backlight is always lighted.
[ID]
0
01
[Setup]
2
I/O
3
COM.
4
Logging
[Logging]
1
ID
2
Data clear
0
Back
Quit Setup
1
Save
2
Not Save
3
Cancel
[Setup]
3
COM.
4
Logging
5
Clock
[Clock]
20
13
/01/01
00:00
OK Cancel
Logging data
Will be
Cleared.
OK
Cancel
[Setup]
4
Logging
5
Clock
6
Display
[Display]
1
Contrast
2
Backlight
0
Back
[Contrast]
＋
－
[Display]
1 Contrast
2
Backlight
0 Back
Pale
Dark
