Mitsubishi Electric EMU4-CNT-MB, Руководство пользователя

Страница: 118 / 136

117
■
When setting the logging ID
(3) Select the logging ID and then click the Write button.
(4) After the write has been completed, the following message appears.
Click the OK button to close the message.
■
When deleting the logging data in the logging unit.
(3) Click the Clear logging data button.
(4) After the data clear has been completed, the following message appears.
Click the OK button to close the message.
10.5 Check of IP Address
This function will be used when the IP address of the control unit is unclear.
The range of IP addresses is specified to execute the search whether any control units exist that are connected to computers
within the range
*Note that the search range is limited to a network with the same first to third octet of IP address.
(1) Make a one-to-one connection between the parent terminal and the computer with a LAN cable.
*Set the computer’s IP address in order to be in the same network.
(2) Set the range to search the IP address and then click the
Examine button.
The first to third octet
IP address: XXX.XXX.XXX.XXX