110
10. Maintenance Menu (with Control Unit Engineering Tool)
This chapter describes some settings other than control and additional features/functions.
For these operations, Control Unit Engineering Tool (Model: EMU4-KNE) is used.
10.1
Output of Event Log
The event logs of the parent terminal will be output in CSV format (saved in the computer).
(1) Connect the parent terminal and the computer with a LAN cable.
*Set the computer’s IP address in order to be in the same network.
(2) Select the number of event logs for output.
Output number
Details
Latest 10
Output the latest 10 event logs.
All items
Output all the event logs in the past.
*This function is available when the parent terminal is in the STOP status of control operation.
If you attempt to execute it in the RUN status, a message will appear to ask whether to execute
after the status is changed to STOP.
*For details on the output file, refer to
10.1.1 File Name and Format of Event Log
(3) Click the
...
button to select a destination of the output logs.
(4) Enter a password.
For the password, refer to
(5) Click the
Event log output
button.
(6) After the event log output has been completed, the following message appears.
Click the
OK
button to close the message.
Содержание EMU4-CNT-MB
Страница 91: ...90 3 Click the Register button to save the settings ...
Страница 131: ...130 CC Link Communication Unit for Energy Measuring Unit EMU4 CM C ...
Страница 133: ...132 Small Type Display Unit for Energy Measuring Unit EMU4 D65 ...
Страница 134: ...133 15 External Dimensions of the Control Unit Note The unit of numbers mm Model EMU4 CNT MB Model EMU4 BT ...
