Mitsubishi Electric DX-TL4E, Руководство пользователя

Страница: 60 / 113

User’s Manual
48
Figure 65 — Port Number Setup screen.
NOTE: You will need to get the appropriate Port Number for each DX-PC4E (Remote
Operation Software) related program (Admin, Watch, Search and Callback) from your network
administrator.
Change the number by highlighting it and using the Up and Down arrow buttons to increase or
decrease the number.
The factory default Port settings are:
Remote
Admin: 8200
Remote Watch: 8016
Remote Search: 10019
Remote Callback: 8201
NOTE: The system restarts automatically after changing the port settings.
NOTE: Do NOT use the same port number for two different programs, otherwise, the DVR
cannot be connected with a PC running DX-PC4E.
CAUTION: When changing the port settings, you must change the port settings on
a PC running DX-PC4E as well. Refer to the DX-PC4E manual for details.
You can save your changes and return to the
Network Setup
screen by highlighting
OK
and
pressing the button. Selecting Cancel exits the screen without saving the changes.
Selecting DHCP from the Type and highlighting OK reads the current IP Address of the DVR
configured by DHCP (Dynamic Host Configuration Protocol) network.