background image

40

  Search by Motion

You can search by motion in a speci

fi

 c area. For this function, 

the camera number and start time need to be speci

fi

 ed. The 

search result is displayed in frame still playback of the single 
screen display.

A + D

6

B

Search

1

steps

 1, 2, 4

step

 3

Search by Motion

Motion Detection Settings

Motion Mask Setting

User Menu

step

1.

  Set the camera number to be searched.

step

2.

  Set the time for start searching.

•  To search from the oldest recording point, select 

“Oldest.”

•  When the search start point is set to the earlier 

time than the recording start point, the search is 
executed from the oldest recording point.

step

3.

  Set the motion detection conditions for playback.

•  Set motion mask setting, sensitivity, and motion 

threshold. 

 See page 56 for the details of 

these settings.

•  The sensitivity of motion detection conditions for 

playback has two setting items, “Low” and “High.”

•  The motion detection settings for recording 

(Motion A or B) can be copied. To copy the 
settings for recording, display the desired setting 
in “Same as Recording Setting” and then select 
“same.”

  The sensitivity setting for playback is set to 

“High” when the setting for recording of “High,” 
“Mid High,” or “Mid” is copied, and is set to “Low” 
when the setting for recording of “Mid Low” or 
“Low” is copied.

step

4.

 Select 

“Search.”

Search (continued) 

User Menu

Содержание DX-TL4716E

























































































































































Отзывы: