manualshive.com logo in svg

Mitsubishi Electric 13JV28, Справочное руководство

Mitsubishi Electric 13JV28 - высококачественный продукт, требующий аккуратной эксплуатации. Для подробных указаний об использовании и обслуживании, скачайте бесплатный Руководство по эксплуатации на нашем сайте. Гарантировано качественная информация для удобства пользователей. Скачивайте с manualshive.com.

Поделиться
Скачать
background image

9  CC-Link IE Field Network

9.4  Backing up/Restoring Data of Devices Supporting iQSS

271

9

5.

Setting the operation setting when a data restoration error occurs

Set the operation to be performed when the data restoration fails on some devices while being processed to multiple devices 
supporting iQSS to the lower 8 bits of SD1367 (iQ Sensor Solution data backup/restoration operation setting).

■

Performing a data restoration

Turn ON SM1364 (iQ Sensor Solution restoration request) to request a data restoration.
Data is restored after a data restoration request.
SM1364 is turned OFF when a data restoration is completed.

1.

Checking the execution status of a data restoration

The execution status of a data restoration can be checked with the following special register areas.

*1 For an iQ Sensor Solution related error (error code: 4805H), the number of devices in which the processing has been abnormally 

completed is not counted.

2.

Canceling a data restoration

Turn ON SM1367 (iQ Sensor Solution backup/restoration cancellation request) to cancel a data restoration.
A cancellation is performed for each device supporting iQSS, so it will be canceled when a data restoration which is being 
performed to a device supporting iQSS at the time a cancellation request is made is completed.

3.

Checking the completion of a data restoration

When a data restoration is completed, the restoration completion status can be checked with the following special relays.
 • Normally completed: SM1365 (iQ Sensor Solution restoration normal completion) is turned ON.
 • Abnormally completed: SM1366 (iQ Sensor Solution restoration abnormal completion) is turned ON.

4.

Checking a data restoration error

Even if a data restoration to a target device supporting iQSS is completed with an error, a diagnostic error will not be detected.
Check the errors with the following special registers.
 • SD1376 (iQ Sensor Solution backup/restoration error cause in a module) stores the error code of an error occurred in a 

module such as a CPU module or CC-Link IE Field Network master station. (

Page 347 Error Code List, 

 Manuals 

for each module)

 • SD1377 (iQ Sensor Solution backup/restoration error cause in a device) stores the error code of an error occurred in a 

device supporting iQSS. (

 Manuals for each device supporting iQSS)

 • Check a module or device in which an error has occurred from SD1378 to SD1382. (

Page 358 Special registers (SD))

■

Releasing the right to use

Set SD1360 to '0000H' in order to turn SM1360 ON. The right to use is released and the next data restoration is ready to be 
performed.
SM1360 is turned OFF when the right to use is released.
If the right to use is released even though it has already been done, SM1360 remains ON because no processing is 
performed. In that case, turn OFF SM1360.

Operation on error

Description

0H: Continue

Set this to continue a data restoration even if it fails on some devices.

1H: Stop

Set this to stop a data restoration if it fails on some devices.

Special register

Description

SD1371

This register stores the number of target devices for each execution unit when starting a data backup or 
restoration.

SD1372

This register stores the number of devices in which the processing has normally be completed for each execution 
unit. (The number is incremented every time the processing of one device is completed normally.)

SD1373

This register stores the number of devices in which the processing has abnormally be completed for each 
execution unit.

*1

 (The number is incremented every time the processing of one device is completed abnormally.)

SD1374

This register stores the progress of processing being executed for a device in percent, from 0 to 100.

Содержание 13JV28



























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 13JV28

Accent 800 Hardware Manual preview
800
Бренд: Accent Страницы: 36
Omron D6F-PH User Manual preview
D6F-PH
Бренд: Omron Страницы: 36
Davis Instruments Leaf Wetness Sensor Connection Manual preview
Leaf Wetness Sensor
Бренд: Davis Instruments Страницы: 2
Datamax M-Class Mark II M-4206 Installation Instructions Manual preview
M-Class Mark II M-4206
Бренд: Datamax Страницы: 22
DataCard SP35 Plus Supplementary Manual preview
SP35 Plus
Бренд: DataCard Страницы: 2
Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Бренд: Federal Signal Corporation Страницы: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Бренд: Federal Signal Corporation Страницы: 8
M7 SPEED R56 Installation Manual preview
R56
Бренд: M7 SPEED Страницы: 11
Magura MT2 Quick Start Manual preview
MT2
Бренд: Magura Страницы: 2
Zacuto VCT Instructions preview
VCT
Бренд: Zacuto Страницы: 5
Vega VEGABAR 81 Quick Setup Manual preview
VEGABAR 81
Бренд: Vega Страницы: 20
Vega SOLITRAC 31 Operating Instructions Manual preview
SOLITRAC 31
Бренд: Vega Страницы: 88
Vega MINITRAC 31 Quick Setup Manual preview
MINITRAC 31
Бренд: Vega Страницы: 28
Vega vegaflex 83 Operating Instruction preview
vegaflex 83
Бренд: Vega Страницы: 92
X Rocker Gaming Chair User Manual preview
Gaming Chair
Бренд: X Rocker Страницы: 12
Panasonic LS-400 Series Manual preview
LS-400 Series
Бренд: Panasonic Страницы: 18
Jabra A7010 Multiuse Technical Specifications preview
A7010 Multiuse
Бренд: Jabra Страницы: 2
Fenix BT10 Quick Manual preview
BT10
Бренд: Fenix Страницы: 4

Бренды по названию

Популярные бренды

Загрузить еще бренды