manualshive.com logo in svg

Mitsubishi Electric 13JV28, Справочное руководство

Mitsubishi Electric 13JV28 - высококачественный продукт, требующий аккуратной эксплуатации. Для подробных указаний об использовании и обслуживании, скачайте бесплатный Руководство по эксплуатации на нашем сайте. Гарантировано качественная информация для удобства пользователей. Скачивайте с manualshive.com.

Поделиться
Скачать
background image

260

9  CC-Link IE Field Network
9.4  Backing up/Restoring Data of Devices Supporting iQSS

■

Setting the backup setting

1.

Setting a target module type

Set a target module with the lower 8 bits of SD1362 (iQ Sensor Solution data backup/restoration target module, execution unit 
setting).

2.

Setting an execution unit

Set a unit to specify the range of data to be backed up at once.
Specify the execution unit to the upper 8 bits of SD1362.

3.

Setting a number for a data backup folder name

Set a folder number to SD1363 (iQ Sensor Solution backup/restoration folder number setting).

*1 When the specified folder number exists, the operation to be performed depends on the specification of the execution unit as follows:

Target module type

Description

4H: CC-Link IE Field Network

Set this to specify a device supporting iQSS which is connected to the CC-Link IE Field Network master station.

Execution unit

Description

1H: Module unit

Set this to specify the device supporting iQSS which is connected to the own network among the devices which 
are connected to a CC-Link IE Field Network master station with the specified start I/O number.

2H: Station unit

Set this to specify either of the following iQSS supported devices which are connected to a CC-Link IE Field 
Network master station with the specified start I/O number: the devices supporting iQSS with the specified 
station number or all devices supporting iQSS which are connected to the specified station number.

3H: Station sub-ID unit

Set this to specify the following devices supporting iQSS which are connected to a CC-Link IE Field Network 
master station with the specified start I/O number: the devices which are connected to the specified station 
number with the specified station sub-ID number.

Target folder

Description

FFFFH: Automatic specification (default)

Among the numbers (0 to 99) that are not used for backup folder names, the smallest number is used for a new 
backup folder name.
An error occurs when unused number is no longer available due to such cases as the number of folders reached 
the upper limit.

FFFEH: Automatic specification (folder 
deletion supported)

Among the numbers (0 to 99) that are not used for backup folder names, the smallest number is used for a new 
backup folder name.
The oldest backup folder (date_number) is deleted and the number of the deleted folder is used for a new backup 
folder name when unused number is no longer available due to such cases as the number of folders reached the 
upper limit.

0 to 99: Target folder specification

Specify a number (0 to 99) of the backup folder name.
When another folder with the same number exists, the target data is overwritten in execution unit without 
changing the folder name.

*1

Execution unit

Operation

1H: Module unit

When the backup data with the same target module exists, the backup folder (start I/O number_station number) 
is deleted before performing data backup.

2H: Station unit

When the backup data with the same target module and the same target station number exists, data backup is 
performed after the backup folder (start I/O number_station number) is deleted.

3H: Station sub-ID unit

When the backup data with the same target module and the same target station number exists, the information of 
the backed up station sub-ID is added to the system file for iQ Sensor Solution backup/restoration.
When the backup data with the same target module, the same target station number, and the same target station 
sub-ID number exists, the backup data (information of each station sub-ID) is deleted before performing data 
backup.

Содержание 13JV28



























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 13JV28

Manfrotto 115 Instructions preview
115
Бренд: Manfrotto Страницы: 2
Manfrotto 143 Instructions For Use preview
143
Бренд: Manfrotto Страницы: 2
Iget C210 Quick Start Manual preview
C210
Бренд: Iget Страницы: 7
LAZER SMX Owner'S Manual preview
SMX
Бренд: LAZER Страницы: 13
Latento XP Series Mounting Instruction preview
XP Series
Бренд: Latento Страницы: 60
Easy Quick T2 Operating Instructions Manual preview
T2
Бренд: Easy Quick Страницы: 11
Radio Shack Optimus 5100 Owner'S Manual preview
Optimus 5100
Бренд: Radio Shack Страницы: 2
Panasonic SU-7 Series Manual preview
SU-7 Series
Бренд: Panasonic Страницы: 16
NEC NP510WS Series User Manual preview
NP510WS Series
Бренд: NEC Страницы: 8
TAUBENREUTHER 16 - 590 Fitting Instructions Manual preview
16 - 590
Бренд: TAUBENREUTHER Страницы: 11
Yakima SKYBOX Series Manual preview
SKYBOX Series
Бренд: Yakima Страницы: 15
ABLE VEGAPULS 62 Installation & Maintenance Instructions Manual preview
VEGAPULS 62
Бренд: ABLE Страницы: 20
Zebronics ZEB-LPC2365 User Manual preview
ZEB-LPC2365
Бренд: Zebronics Страницы: 6
Rice Lake IQ plus 510 Quick Start Manual preview
IQ plus 510
Бренд: Rice Lake Страницы: 2
agno's Jumbo MultiBigShoot Quick Manual preview
Jumbo MultiBigShoot
Бренд: agno's Страницы: 2
Marantz Mount 12 Installation Instructions preview
Mount 12
Бренд: Marantz Страницы: 2
Dometic PERFECTVIEW CAM80AHD Installation And Operating Manual preview
PERFECTVIEW CAM80AHD
Бренд: Dometic Страницы: 196
FORM FIT 1308 Installation Instructions preview
1308
Бренд: FORM FIT Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды