801 LSV 8 Ton Electric Logsplitter
11
Original Instructions Version August 19
8.3 Fitting the complete control arms (10)
(accessories bag B)
•
Remove pre-assembled bolt (C).
• Grease the top and bottom plates.
• Insert the complete control arm in the position
provided (1).
• Guide control arm (A) into the rocker switch (B) (2)
• Secure the control arms completely with the bolts
(C) and fix them with a cotter pin.
• Now fasten the other control arm on the other side
in accordance with the method described
9.4 Fitting the claws (enclosed accessories bag C)
• Fasten the additional retainers (D) to the claws with
two Phillips head screws, washers and nuts
• Make sure that the larger additional retainer is
fastened with the left claw (4).
• Place the adjustable claws on the hexagon nuts
previously attached, and fasten these with the star
grip screws and washers enclosed
• Note that the prongs on the claws must point
towards each other after installation
IMPORTANT!
You must fully assemble the appliance before using it for
the first time!
1
2
3
