801 LSV 8 Ton Electric Logsplitter
2
Original Instructions Version August 19
SAFETY WARNINGS & EXPLANATION OF SYMBOLS ON THE MACHINE
UNDERSTAND YOUR LOG SPLITTER
Read and understand the owner’s manual and labels affixed to the log splitter. Learn its
application and limitations as well as the specific potential hazards peculiar to it.
DRUGS, ALCOHOL AND MEDICATION
Do not operate the log splitter while under the influence of drugs, alcohol, or any medication
that could affect your ability to use it properly.
AVOID DANGEROUS CONDITIONS
Always operate your log splitter on dry, solid, level ground. Never operate your log splitter on
slippery, wet, muddy, or icy surfaces. Keep your work area clean and well lit. Cluttered areas
invite injuries. Do not use the log splitter in wet or damp areas or expose it to rain. Do not
use it in areas where fumes from paint, solvents or flammable liquids pose a potential hazard.
INSPECT YOUR LOG SPLITTER
Check your log splitter before turning it on. Keep guards in place and in working order.
Replace damaged, missing or failed parts before using it. Make sure all nuts, bolts, screws,
hydraulic fittings, hose clamps, etc. are securely tightened. Always check the oil level in the
hydraulic oil tank. Never operate your log splitter when it is in need of repair or is in poor
mechanical condition.
WORK WEAR
Do not wear loose clothing, gloves, neckties or jewellery (rings, wrist watches). They can be
caught in moving parts. Protective gloves and non-skid footwear are recommended when
working. Wear protective hair covering to contain long hair, preventing it from getting
caught in machinery.
PROTECT YOUR EYES AND FACE
Any log splitter may throw foreign objects into the eyes. This can cause permanent eye
damage. Always wear safety goggles. Everyday eyeglasses have only impact resistant lenses.
They are not safety glasses.
EXTENSION CORDS
Improper use of extension cords may cause inefficient operation of the log splitter which can
result in overheating. Be sure the extension cord is no longer than 10m and its section is no
less than 2.5mm
2
to allow sufficient current flow to the motor. Connections must be made
with protected material suitable for outdoor use.
AVOID ELECTRICAL SHOCK
Check that the electric circuit is adequately protected and that it corresponds with the power
and voltage of the motor. Check that there is a ground connection. Never open the switch /
plug box. Should this be necessary, contact a qualified electrician. Make sure your fingers do
not touch the plug’s metal prongs when plugging or unplugging the log splitter.
PREVENT FIRES
Do not smoke or have open flames when operating or refuelling the log splitter. Never
operate the log splitter near a flame or spark. Oil is flammable and can be ignited.
