Mitel UC360, Руководство администратора

Страница: 91 / 141

5000 CP Configuration for the UC360
75
5000 CP Configuration for the UC360
The following section describes the hardware and the system programming required for the
5000 CP on the UC360:
The following hardware is needed to set up the UC360 on the 5000 CP:
• UC360 Collaboration Point unit (Part Number 50006580 (audio only))
• UC360 Collaboration Point power supply large brick
• Two Ethernet cables
• One available Category F licenses for SIP device (required for the 5000 CP)
• UC360 Collaboration Point version 1.0 SP2 and higher
• Mitel 5000 CP Release 5.1 SP4 and higher, or Mitel 5000 CP Release 6.0
The following features are supported:
• Audio bridge with in-room collaboration using an HDMI monitor or projector
• SIP Peer-to-Peer audio
• Up to four calls of any combination of internal and external
5000 System Programming
1. In Database Programming, go to System/Devices and Feature Codes/Phones.
2. In the right-side pane, right-click and select Create SIP phone .