Mitel UC360 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 141

background image

UC360 Configuration

15

Misc

•

Registration Time Out — the SIP registration time out value in seconds. It is recommended
to leave this at the factory default setting of 3600 seconds.

•

Keep Alive Interval — the SIP keep-alive interval in seconds. It is recommended to leave
this at the factory default setting of 0, which is disabled.

•

Proxy Server Address — the SIP Proxy server IP address (IPv4) if you have a server that
is used when interoperating with a 3rd party server, for example, BroadSoft. See the Mitel
SIP Centre of Excellence (SIP CoE).

•

Proxy Server address for Dial URI — the internal IP address of the gateway or SIP Outbound
Proxy server address in the format FQDN | IP [:port]. This is the address of the SBC.

Security

•

TLS Server Validation — enable or disable the validation of TLS connections with installed
certificate authority certificates

•

Install Certificates From External Storage — install a user or CA certificate and keys for
validating TLS connections

•

Remove All Installed Certificates — remove all installed user and CA certificates and keys

TLS Server Validation

When TLS Server Validation is enabled, the certificate supplied by the SIP Server when using
the TLS transport during the TLS handshake is validated against the list of trusted root certificate
installed on the UC360.

The Mitel root certificate is the single entry in this certificate list by default on the UC360.

Install Certificates From External Storage

You can install new certificates from any.crt file (for example, mat_ca.crt in PEM format) or p12
file (PKCS12 format) in the following locations: the root directory of a USB drive, the root
directory or download directory of an sdcard.

If there are multiple.crt and/or.p12 files, you will see a list of files to choose from. Note that the
list indicates the path, including the device on which each file is present.

Upon successful installation of a certificate, the selected file is deleted on the external storage
device and will no longer appear in the above list.

If only a single file is found, you see only the information on any certificate found in that file and
have the option to name the certificate. The same process occurs with a file selected from the
above list.

Remove All Installed Certificates

If the administrator confirms they want to remove all installed certificates after selecting that
option, then the default Mitel certificate is the only that remains in the list.

«
...
29
30
31
32
33
...
»

Содержание UC360














































































































































Отзывы:

Нет отзывов

Похожие инструкции для UC360

Бренд: HAFURY Страницы: 60

Бренд: Olympia Страницы: 144

Alltel Hue II SCH-R600 Series

Бренд: Samsung Страницы: 167

Бренд: Samsung Страницы: 204

SoundStation 7000

Бренд: Polycom Страницы: 38

Бренд: Light Repute International Страницы: 15

Бренд: Shure Страницы: 18

Бренд: Micromax Страницы: 40

InfoView IV 2000

Бренд: InnoMedia Страницы: 50

Бренд: Nodis Страницы: 20

Бренд: Pantech Страницы: 213

Бренд: Alcatel Страницы: 21

Бренд: Sirena Страницы: 32

Бренд: Zte Страницы: 89

Бренд: Toshiba Страницы: 242

Бренд: Sigma Страницы: 15

Бренд: Zte Страницы: 65

WX-C1011 Series

Бренд: Panasonic Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды