R000226 BP1 Automation
20
v.0.1 03/21
12. Next, we add a GPO command to this macro.
Figure 6-15
GPO 8 is the “XL Mover to 3D” channel, and its action needs to be set to Toggle in order
for it to trigger the BP1. Remember to save the macro after adding the new command.
13. Given that the XL Mover takes about 10 seconds to move the 3D filter into position,
and we don’t want anything to be projected until this is complete, we will now move the
cue further up the macro, so that it executes as the first command after the video output
has been muted. This is done by highlighting the command entry and then moving it using
the arrow buttons, as in Figure 6-16.
