P A G E 7 O F 1 7
M I S S I ON S OL A R E NE R G Y L L C
ELECTRONIC
versions are uncontrolled except when accessed directly from document control directory. Printed copies are uncontrolled unless verified against online document.
C OP YR I GH T 2 0 2 0 M I S S IO N S OL A R E N ER GY L L C , AL L R I G H T S R ES E R V ED
REVISION: R2 RELEASE DATE: 9/25/2020
(Optional) If tape has been used to
provide additional support to module
stack, peel tape back as needed to
remove individual modules.
The first module must be separated and
pulled out with additional care so as to
not scratch the modules. Continue
removing modules by peeling back tape,
moving the module forward and pulling
it up.
When four modules remain, the stack
will inherently become prone to tipping
over. At this point, ensure two
personnel are available to secure the
stack.
Slide all of the remaining modules to the
front of the box.
Carefully lower modules down to a
horizontal position with the glass side
down.
Remove box sleeve allowing easy access
to remaining modules from the
horizontal stack.
Always wear Proper PPE when handling MSE Panels
