P A G E 5 O F 1 7
M I S S I ON S OL A R E NE R G Y L L C
ELECTRONIC
versions are uncontrolled except when accessed directly from document control directory. Printed copies are uncontrolled unless verified against online document.
C OP YR I GH T 2 0 2 0 M I S S IO N S OL A R E N ER GY L L C , AL L R I G H T S R ES E R V ED
REVISION: R2 RELEASE DATE: 9/25/2020
7.0
UNPACKING & STORAGE
7.1
GENERAL INSTRUCTIONS
Store modules in an environment consistent
with prudent solar industry practices,
including, storage in dry conditions such that
modules (or any part thereof) are not
immersed in water.
Do not carry the module above the head.
Do not allow children or unauthorized
persons near the installation site or storage
area of modules.
Do not drop or place objects such as tools on
the modules.
Do not use forklifts with less than 72 inch
forks to handle module pallet.
Do not mark the modules with sharp
instruments.
Unpack the module pallet with care and
follow the unpacking steps in this manual. Be
careful when unpacking, transporting and
storing the modules.
Particular attention should be taken to avoid
module back sheet contact with sharp objects.
Scratches may directly affect product safety.
Do not carry a module by its wires or junction
box. At least two or more people are
recommended to carry the module for safe
handling.
Do not leave a module unsupported or
unsecured.
Do not place modules directly on top of each
other and prevent modules from touching
one another.
Do not change the wiring of bypass diodes.
Do not place excessive loads on the module
or twist the module frame.
Keep all electrical contacts clean and dry.
Do not stand, step, walk and/or jump on any
part of the module.
Modules may have sharp frame corners, use
of puncture and cut-resistant gloves is
recommended.
Always wear Proper PPE when handling MSE Panels
