Miranda XVP-801i, Инструкция по установке и эксплуатации

Страница: 30 / 39

GUIDE TO INSTALLATION AND OPERATION
26 | XVP-801i
Level (dB) : -96 to 0 dB in 0.5 dB steps: sets an attenuation level to the channel source. For non-
PCM audio, the level value is overridden to 0 dB.
Embedding
tab, HD Audio output
Audio Insert: insertion of audio in the HD output signal may be set to Auto or OFF . When set to Auto , only
the audio groups containing at least one audio channel will be embedded at the output. When set to OFF , no
audio is embedded in the HD output.
Embedding tab, SD Audio output
Audio Insert: insertion of audio in the SD output signal may be set to Auto 24 bit, Auto 20 bit or OFF . When
set to Auto , only audio groups containing at least one audio channel will be embedded at the output at the bit
depth selected. When mode is set to OFF , no audio is embedded in the SD output.
Figure 3.12
HD Audio Output group – Embedding tab
The ABUS group
When companion audio cards such as the DAP-781i are used to provide additional audio channels, the
ABUS audio bus links installed audio cards and the XVP-801i. This panel, called ABUS group, is used to
instruct the XVP-801i about the presence of installed audio cards and the system configuration.
Multiple Card Config sub-section
A1/A2 Presence : Monitors the presence of DAP-781i companion audio cards installed in the chassis (see
section 2.2 XVP-801i Installation).
E1/E2 Presence: Monitors the presence of Dolby-E decoding modules installed on DAP-781i cards installed
in the chassis.