GUIDE TO INSTALLATION AND OPERATION
XVP-801i |
25
SUM (A+B)
:
The output channel is the sum of the two channels sources (
ABUS Select
and
Channel
) selected in sub-menus SOURCE A and SOURCE B.
If you select this option, the SUM (A+B) Level pull-down is activated, allowing you to
reduce the level of the summed output (0dB, -3dB or -6dB).
Mix
:
The output channel is a mono mix of the (
ABUS Select
and
Channel
) selected in
sub-menus SOURCE A and SOURCE B.
Note:
in the case of SUM and MIX, if either of the two input channels is non-PCM, the
output will always be SOURCE A
Mute
:
Mutes the audio channel by checking this box.
Figure 3.11
HD Audio Output group – CH 1-2 tab
Source A & Source B
: This sub-section allows, for each output channel, to select its channels sources
(A&B).
ABUS Select
: V, A1, A2, E1, E2: selects the embedded input audio (V), one of two DAP-781i audio
companion cards (A1 or A2) or one of two Dolby-E decoding modules installed on DAP-781i cards
(E1 or E2) to be used as the source for this channel. Audio Bus is configured in the
ABUS
group.
Channel
: Channel 1, …, Channel 8 (for A1, A2 and E1, E2), …, Channel 16 (for V): selects the
channel to be used from the selected audio source.
Содержание XVP-801i
Страница 1: ......
Страница 4: ...GUIDE TO INSTALLATION AND OPERATION XVP 801i ...
Страница 20: ...GUIDE TO INSTALLATION AND OPERATION 16 XVP 801i Table 3 1 Available Presets for 16 9 Output ...
Страница 21: ...GUIDE TO INSTALLATION AND OPERATION XVP 801i 17 Table 3 2 Available Presets for 4 3 Output ...