3
The Mira Vigour Thermostatic Power Shower is an all-in-one power shower with
an integral mains voltage pump and separate controls for low and temperature. It
features a 15 mm dual entry push-it manifold which supports various inlet supply
conigurations. The manifold includes inlet ilters and check valves. The thermostatic
mixer incorporates a wax capsule sensing unit.
Designed to be surface mounted, the Thermostatic Power Shower comes complete
with an adjustable spray handset with three settings, lexible hose, adjustable slider,
sliding rail, soap tray and bracket.
Patents
Patents
GB: 2 340 210, 2 392 223, 2 392 224, 2 392 225
USA: 7 240 850
Patent Applications
Euro: 03254070.0
INTRODUCTION
IMPORTANT SAFETY INFORMATION
Warning!
1.
Products manufactured by us are safe and without risk provided they are
installed, used and maintained in good working order in accordance with our
instructions and recommendations.
2.
THIS APPLIANCE MUST BE EARTHED. MAKE SURE SUPPLEMENTARY
BONDING COMPLIES WITH THE “REQUIREMENTS FOR ELECTRICAL
INSTALLATIONS”
.
In accordance with the current edition of ‘The Plugs and Sockets etc. (Safety)
Regulations in force at the time of installation, the Appliance is intended to be
permanently connected to the ixed electrical wiring of the mains system.
3.
DO NOT CONNECT THE APPLIANCE TO A MAINS-FED WATER SUPPLY
.
Such a connection will damage the Appliance, and is not covered under the
manufacturer’s guarantee.
4.
The Appliance must not be itted where it may be exposed to freezing conditions.
Make sure that any pipework that could become frozen is properly insulated.
5.
DO NOT
operate the Appliance if it is frozen. Allow the Appliance to thaw before
using again.
6.
DO NOT
operate the Appliance if water leaks from the unit, maintenance will
be required before the Appliance can be safely used.
7.
DO NOT
allow the Appliance to be run dry.
8.
DO NOT
it any form of outlet low control. Only shower ittings recommended
by Mira Showers should be used.
9.
There are no user serviceable components beneath the cover of the Appliance.
Only a competent trades person should remove the cover.
