Mira vigour Скачать руководство пользователя страница 29

28

CUSTOMER SERVICE

© Kohler Mira Limited, October 2007

1088849-W2-A   (B85N)

Guarantee of Quality

Mira Showers guarantee your product against any defect 
in  materials  or  workmanship  for  the  period  shown  in  the 
Guarantee  Registration  Document  included  with  your 
shower.
Alternatively,  to  confi rm  the  applicable  guarantee  period 
please contact Customer Services.
To  validate  the  guarantee,  please  return  your  completed 
registration card.
Within the guarantee period we will resolve defects, free 
of  charge,  by  repairing  or  replacing  parts  or  modules  as 
we may choose.
To be free of charge, service work must only be undertaken 
by Mira Showers or our approved agents.
Service  under  this  guarantee  does  not  affect  the  expiry 
date.
The  guarantee  on  any  exchanged  parts  or  product  ends 
when the normal product guarantee period expires.

Not covered by this guarantee:

Damage  or  defects  arising  from  incorrect  installation, 
improper  use  or  lack  of  maintenance,  including  build-up 
of limescale.
Damage or defects if the product is taken apart, repaired or 
modifi ed by any persons not authorised by Mira Showers 
or our approved agents.
This  guarantee  is  in  addition  to  your  statutory  and  other 
legal rights.

What to do if something goes wrong

If  when  you  first  use  your  shower,  it  doesn’t  function 
correctly, fi rst contact your installer to check that installation 
and commissioning are satisfactory and in accordance with 
the instructions in this manual. We are on hand to offer you 
or your installer any advice you may need.
Should  this  not  resolve  the  diffi culty,  simply  contact  our 
Customer  Services Team  who  will  give  every  assistance 
and,  if  necessary,  arrange  for  our  service  engineer  to 
visit. If the performance of your shower declines, consult 
this manual to see whether simple home maintenance is 
required. Please call our Customer Services Team to talk 
the  diffi culty  through,  request  a  service  under  guarantee 
if  applicable,  or  take  advantage  of  our  comprehensive 
After-Sales service.
As part of our quality and training programme calls may be 
recorded or monitored.
Our Customer Services Team is comprehensively trained to 
provide every assistance you may need: help and advice, 
spare parts or a service visit.

Spare Parts

We maintain an extensive stock of spares and aim to provide 
support throughout the product’s expected life.
Spares  can  be  purchased  from  approved  stockists  or 
merchants (locations on request) or direct from Customer 
Services.
Spares direct will normally be despatched within two working 
days. Payment can be made by Visa or MasterCard at the 
time of ordering. Should payment by cheque be preferred, 
a pro-forma invoice will be sent.
All  spares  are  guaranteed  for  12  months  from  date  of 
purchase. Spares that have been supplied directly from us 
can be returned within one month from date of purchase, 
providing  that  they  are  in  good  order  and  the  packaging 
is unopened.

Note!

 Returned spares will be subject to a 15% restocking 

charge and authorisation must be obtained before return. 
Please contact our Customer Services Team.

Note! 

In the interests of safety, spares requiring exposure 

to mains voltages can only be sent to competent persons.

Service

Our Service Force is available to provide a quality service 
at a reasonable cost. You will have the assurance of a Mira 
trained  engineer/agent,  genuine  Mira  spare  parts  and  a 
12 month guarantee on the repair.
Payment  should  be  made  directly  to  the  engineer/agent 
using  Visa,  MasterCard  or  a  cheque  supported  by  a 
banker’s card.

To Contact Us

England, Scotland, Wales and Northern Ireland
Mira Showers Customer Services

Telephone: 0870 241 0888, Mon to Fri 8:00 am - 5:30 pm
 

 

Sat 8:30 am - 3:30 pm

E-mail: 

[email protected]

Fax: 

01242 282595

By Post: 

Cromwell Road, Cheltenham,

 

Gloucestershire, GL52 5EP

Eire
Modern Plant Ltd (Dublin)

Telephone: 01 459 1344, 

Mon to Fri 9:00 am - 5:00 pm

E-mail: 

[email protected]

Fax: 

Dublin 01 459 2329

Post: 

Otter House, Naas Road,

 

Clondalkin, Dublin 22

Modern Plant (Cork)

Telephone: 021 496 8755,  Mon to Fri 9:00 am - 5:00 pm
E-mail: 

[email protected]

Fax: 

021 496 8607

Post: 

Tramore Road, Cork

Mira is a registered trade mark of 

Kohler Mira Limited.

The company reserves the right to alter 

product specifi cations without notice.

www.mirashowers.com

Содержание vigour






























Отзывы: