19
Caution!
When resistance is felt
DO
NOT USE FORCE
to turn the spindle any
further as this is the
maximum shower
temperature
obtainable
with the available
hot water storage temperature.
FORCE
will
DAMAGE
the internal components.
6.
Turn the temperature spindle until the
maximum water temperature required
is obtained.
Warmer
- Turn spindle anticlockwise
Cooler
- Turn spindle clockwise
7.
Insert the temperature hub with the pip
on the temperature hub aligned with
the slot on the thermostatic cartridge.
Secure the temperature hub with the
retaining screw.
8.
Insert the outer low control knob in
the maximum low position.
9.
Insert the temperature indicator trim
and the inner temperature control
knob.
Caution!
If resistance is felt when
turning the inner temperature control
knob,
DO NOT USE FORCE
to
turn the knob any further as this will
DAMAGE
internal components.
10.
Make sure the inner temperature
control knob can be fully turned in
both directions.
11.
Check the maximum temperature
setting. If necessary repeat the
temperature adjustment until the
required temperature is achieved.
Inner Temperature Control Knob
Maximum Flow Position
Temperature Indicator Trim
Temperature Spindle
Align the pip on the
temperature hub with the slot in the
thermostatic cartridge.
