Mira Mode Maxim, Инструкция по установке и эксплуатации

Страница: 7 / 26

13 12
Specifications
Standards and Approvals
The Mira Mode Maxim complies with all relevant directives for CE marking.
The Mira Mode Maxim is a type 1 electronic, independently mounted control for surface
mounting. The Mira Mode Maxim is in compliance with the essential requirements of the RED
directive 2014/53/EU. A copy of the declaration of conformity may be obtained by visiting
www.mirashowers.co.uk/for-the-expert/resources/product-approvals.
Mira Digital Mixing Valve High Pressure (Not suitable for pumped gravity systems)
Mira Digital Mixing Valve Pumped (Not suitable for mains pressure systems)
Shower Fittings
General
Pollution Degree 2
Rated Impulse Voltage 2.5 kV
Connections 15mm Compression/Pushfit
Pressures
Maximum Static Pressure 1000 kPa (10 bar)
Maximum Maintained Pressure 500 kPa (5 bar)
Minimum Maintained Pressure 100 kPa (1 bar)
Supply Pressure Differential Nominally Equal
Temperatures
Maximum Temperature (setting range) 35°C - 45°C (Factory Preset 45°C)
Minimum Temperature
Thermostatic control down to 30°C
Full Cold also selectable
Hot Water Range - Supply 55°C - 65°C
Cold Water Range - Supply 1°C - 20°C
Temperature Stability ± 1°C at recommended supply conditions
Ambient Temperature 1°C - 40°C
Maximum Relative Humidity 95% non-condensing
Flow Rates
Nominal Flow Rate* Valve capable of up to 16 l/min @ 1 bar
Electrical
Supply Voltage 230V ac 50 Hz
Maximum Load 20W
Pressures
Maximum Static Pressure 100 kPa (1 bar) 10m head
Maximum Maintained Pressure 100 kPa (1 bar) 10m head
Minimum Maintained Pressure 1 kPa (0.01 bar) 0.01m head
Supply Pressure Differential Nominally Equal
Temperatures
Maximum Temperature (setting range) 35°C - 45°C (Factory Preset 45°C)
Minimum Temperature
Thermostatic control down to 30°C
Full Cold also selectable
Hot Water Range - Supply 55°C - 65°C
Cold Water Range - Supply 1°C - 20°C
Temperature Stability ± 1°C at recommended supply conditions
Ambient Temperature 1°C - 40°C
Maximum Relative Humidity 95% non-condensing at 30°C
Flow Rates
Nominal Flow Rate* Valve capable of up to 16 l/min @ 0.01 bar
Electrical
Supply Voltage 230V ac 50 Hz
Maximum Load 200W
Controller
Electrical Supply 12 Vdc SELV 2W max. Derived from valve module
Ingress Protection IP X4 - Suitable for installation in Zone 1
Maxim Ambient Temperature 40°C
On/Off Remote Button
Electrical Supply 3.3 Vdc SELV 2mW max. Derived from valve module
Ingress Protection IP X4 - Suitable for installation in Zone 1
Maxim Ambient Temperature 40°C
Minimum maintained water pressure 0.1 bar (10 kPa)
Maximum maintained water pressure 5.0 bar (500 kPa)