Mira Mode Maxim, Инструкция по установке и эксплуатации

Страница: 20 / 26

39 38
Ensure pipework is thoroughly flushed through before fitting the deluge head.
Screw the fixed shower head onto the brass pipe outlet.
Note: Use two suitably sized wrenches to tighten (approximately 1/4 turn).
Slide the chrome shroud down to conceal the brass pipe. Turn on the shower
control and check for leaks.
The CloudCore™ spray plate can be removed for cleaning or changed to the
RainCore™ spray plate which is more suitable for hard water areas. Refer to
‘Cleaning and Maintenance’.
3
Carefully fit the backplate over the
outlet pipe and secure with the fixing
screws (supplied).
Caution! Take care not to damage the
‘O’ Seal in the back of the backplate.
Fit the olive and compression nipple
over the outlet pipe and tighten the
compression nipple.
Turn on electrical supply
to Digital Mixer Valve.
Make sure the end of the hose is in
either the bath, shower tray or other
water catchment area.
Press the button to turn the shower on and reduce temperature to full cold. For Low
Pressure (pumped) version, let shower run in order to prime the pump. For long pipe
runs, allow 3 - 4 minutes for priming.
Caution! Risk of product damage. Do not run Pumped Valve (low pressure version)
without a water supply for longer than 5 minutes during priming.
Press the Controller button to turn shower on. Test operation of shower by increasing/
decreasing the temperature.
Fit the concealing shroud, the
compression nut and the olive onto the
shower arm. Fit the shower arm into
the compression nipple and tighten
the compression nut. Hand tighten the
concealing shroud onto the backplate.
4
1
2
5
6
5
Commissioning
Run cold water through (approximately 2 minutes) and check entire installation for
water leaks. Press the Controller button to turn the shower off. Fit the second hose
washer and handshower.
4
Backplate
Olive
Compression
Nipple
Olive
Compression Nut
Concealing Shroud
Shower Arm
Shower Arm
Deluge Head
Note! Make sure that the
flow regulator is fitted in
the correct orientation.
Flow Regulator