Mira Extreme Thermostatic, Инструкция по установке и эксплуатации

Страница: 26 / 44

26
For safety reasons this appliance is fitted with an adjustable maximum temperature
setting. This setting must be checked and adjusted as necessary to suit both site
conditions and user’s comfort. Refer to the section "
Commissioning: Adjustable
Maximum Temperature Setting " for further details.
Section
9
Operation
FLOW
TEMPERATURE
Press to stop
the flow of
water.
Turn
anticlockwise
for warmer
water.
Turn
clockwise for
cooler water.
Press
override
button to
override
maximum
temperature
stop.
=
=
=
Stop
Low
Medium
High
Flow
Press middle
button to start
medium flow
of water.
Press top
button to start
high flow of
water.
Press bottom
button to
start low flow
of water.
1.1. Push the lower flow control button
to start the flow of water.
1.2. Press the correct flow control knob
to obtain the desired flow of water.
1.3. Turn the temperature control knob
in the direction of the red indicator
(anticlockwise) for warmer water
and in the direction of the blue
indicator (clockwise) for cooler
water, until the desired
temperature of water is achieved.
Warning! Operation of the override
button will allow a shower
temperature above the preset
maximum.
1.4. To override the preset maximum
temperature depress the override
button and turn the temperature
knob anticlockwise.
1.5. Press the Stop button to stop the
flow of water.
Note! If the Mira Extreme is used
continuously for a prolonged period
the self-resetting thermal trip fitted
to the appliance may operate. This
will shutdown the pump motor and
prevent it from overheating.