22
Essentials 7.5, 8.5 and 9.5
Read the section
'Important Safety Information'
first.
THE SPRAY PLATE HOLES MUST BE KEPT CLEAR
. The spray plate should be
regularly removed and cleaned in descalent. Lack of regular spray plate cleaning will lead
to poor performance and cause early failure of the appliance.
1.
Switch on
pullcord or wall mounted switch. The
'Power'
neon on the Essentials
shower will provide visual indication that the switch is on.
2.
Rotate the
LEFT HAND
control knob to position
'High'
(Full Power).
3.
Wait
15-20
seconds for warm water to reach the handset.
4.
If necessary turn the
RIGHT HAND
control knob slowly to adjust temperature. Allow
10-15
seconds for the adjusted temperature to reach the handset. The control knob
operates through approximately ¾ of a turn from cold to hot. Clockwise rotation will
give warmer water with less flow. Anticlockwise rotation will give cooler water with
more flow.
Note!
Should the product alternate (Hot - Cold). Adjust the right hand control knob
anti clockwise to reduce the temperature. This is normal operation if too high a
water temperature is selected.
5.
TO TURN OFF
turn the
LEFT HAND
control knob anticlockwise to the
'Stop'
position.
6.
A small amount of water may continue to flow from the handset for a few moments.
(For summer economy showering use the
'Med'
(Half Power) position on the control.
For a cold shower select
'Low'
.
7.
Switch off
at the pull-cord or wall mounted switch.
