Mira Elite ST, Инструкция по установке и эксплуатации

Страница: 15 / 36

installation
mira elite sT
read the section 'important safety information' first.
electrical supply is turned
off at the mains.
200 mm minimum gap
from ceiling.
remove the four cover
screws.
cauTion! Do not
drill into buried cables
or pipes.
drill and plug * the
three holes using the
template.
remove the cover and
determine supply pipe
position.
For rear inlet, use
soldered elbow.
Do not trap green wire.
Fit Rubber Feet and fix
appliance to wall.
Flush a minimum
of 10 litres through
pipework.
*
Alternative fixings for some wall structures are not supplied.
1. 2.
200 mm
3.
4. 5. 6.
7. 8. 9.
↓↑
High
Medium
Low