manualshive.com logo in svg

Mira Advance ATL Thermostatic, Инструкция по установке и эксплуатации

Поделиться
Скачать
Mira Advance ATL Thermostatic Скачать руководство пользователя страница 35

35

sPaRe PaRTs

405.58 

Inlet connector assembly

406.27 

Inlet Filter.

416.38 

clamp bracket

1643.100  Thermal Trip.

1643.101  Tank assembly 9 kW/230 v 9.8 kW/240 v (earth wire not included).

1643.102  Tank assembly 8.2 kW/230 v 9 kW/240 v (earth wire not included).

1643.103  Terminal block/earth Wire/neutral Wire.

1643.104  relay board (including screws).

1643.105  Top and bottom cover Inserts (white).

1643.106  9.8 kw control pcb - Standard and Flex models.

1643.107  9.8 kw control pcb - Memory model only.

1643.213  9.0 kw control pcb - Standard and Flex models.

1643.214  9.0 kw control pcb - Memory model only.

1643.108  cover  - Standard model only (control pcb not included).

1643.109  cover - Memory model only (control pcb not included).

1643.110  cover - Flex model only (control pcb not included).

1643.111 

Fuse.

1643.112  drain pump pcb - extra models only.

1643.113  Component Pack (components identified 'B').

1643.114  Splash Guard.

1643.144  Top and bottom cover Inserts (grey).

1643.148  Seal Pack (components identified 'A').

1643.149  Flow Valve Assembly (components identified 'C').

Warning!

 If the wiring layout is changed or amended, the product functionality and 

safety may be affected.

Warning!

  In  the  interests  of  safety,  spares  requiring  exposure  to  mains  voltage 

should only be fitted by competent persons.

Содержание Advance ATL Thermostatic









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды