19
Basic Post Installation Checks
1.
Tu r n o n e l e c t r i c a l
supply.
4.
Temperature to full cold.
5.
Start shower to test for
water flow.
6.
If there is no water after
5 seconds, make sure
that the appliance has
been primed.
5 secs
2.
Test shower drain pump
(if applicable).
3.
power to appliance,
check
start/stop
for
blue light.
OR
7.
push
start/stop
to turn off the
appliance. The pulsing light and
"beep" indicates that the appliance
is shutting down.
Important! Do noT
isolate the
power to the appliance as this may
result in a temporary malfunction.
8.
The appliance will purge water from
its tank for a few seconds.
Important! Do noT
isolate the
power to the appliance.
Go to section:
'Commissioning'
.
