25
6.
push
start/stop
to turn off the
appliance. The pulsing light and
"beep" indicates that the appliance
is shutting down.
Important! Do noT
isolate the
power to the appliance.
5. Powering down the appliance:
Caution!
Isolating power without
shutting down the appliance using
the
start/stop
button, and not
waiting for the flow to stop, will
result in a temporary malfunction.
always follow the correct shut
down procedure
.
8.
Wait until the water has stopped
flowing and turn off the power to the
appliance, residual water may drain
over a few minutes.
7.
The shower will purge water from its
tank for a few seconds.
Important! Do noT
isolate the
power to the appliance.
2. using the shower
refer to section:
'Important safety Information'
first.
1.
With the electrical supply turned on,
push
start/stop
.
2.
Select the desired flow by pushing
either once or twice.
_
+
3.
check water temperature before
entering shower.
_
+
4.
allow 10-15 seconds for any
temperature adjustments to reach
the showerhead.
