Mira Advance ATL J97A, Руководство по установке

Страница: 26 / 40

26
FAULT DIAGNOSIS
1. Installer Troubleshooting Guide
Refer to section: 'Important Safety Information' first and refer also to 'User Trouble
Shooting Guide' .
The following troubleshooting solutions may require the removal of the cover of the
shower. The cover should only be removed by a competent tradesperson and when
doing so they should be aware of the following:
•
Isolate the electrical and water supplies before initially removing the
cover.
•
Make sure Ribbon Cable is disconnected when removing the front
cover and reconnect when maintenance is complete.
•
Mains connections are exposed when the cover is removed.
•
Refer to wiring diagram before making any electrical connections.
•
Make sure all electrical connections are tight to prevent arcing/
overheating.
•
Make sure all plumbing connections are watertight.
When following these instructions, it is sometimes necessary to examine the
appliance with the electrical and water supplies turned on . It is therefore essential
that the appropriate safe working practices are followed in accordance with the
current Health and Safety Legislation.
If conducting a continuity check using a multimeter, make sure the electrical supply
is ISOLATED .