Spirodoc
cod. 980156
Rev 1.3
EN 25/67
E
N
GLI
S
H
To access all oximetry test options / To perform an SpO2/BPM test
To perform a sleep oximetry test
To perform a 6MWT/ to move on to the walking phase of the test
Tom move on to the recovery phase of the 6MWT
To access spirometry testing type
to perform a forced vital capacity test FVC
To perform a slow vital capacity spirometry test VC
To perform a maximum voluntary ventilation spimetry test MVV
To perform a spirometry test with a broncodilator
To print via Bluetooth connection
3.4
Energy saving
WARNING
When the device is on after approximately 10 seconds of disuse the display
enters energy saving mode thereby lowering the display contrast level
automatically.
If the device remains in disuse for approximately 5 minutes an acoustic signal
will be emitted, furthermore if the display is not touched within another 10
seconds the device will turn off by itself.
The device can be turned off in any moment by pressing the
key.
The charging level of the battery pack is shown upon turning on the device with the
symbol:
This image indicates that the battery pack is fully charged(6 indicators). A drop of the
battery pack charge is displayed with a reduction of the indicators.
3.5
Information
Turn on the
SPIRODOC
by pressing
. The display will read:
device name
information
Current date Current time
