10
On/Alarm Silencer switch is to turn the UPS On or silence the audible alarm in
the Battery mode.
OFF switch is to turn the inverter Off and transfer the UPS to the Bypass mode.
Special functions key: Log in/out.
Down arrow: Go to next page.
Up arrow: Go to previous page or change the UPS setting.
Enter key: To save the changes to the UPS setting.
2.5.
Rear Panels
2.5.1 UPS module (ED6200RM) rear panel
A. Dipswitch for the Parallel Redundant function.
NOTE:
The dipswitch must be in the Off position when the Parallel
function is not being used.
B. RS232 Port for monitoring and control.
C. EPO (Emergency Power Off) Port
D. Input Circuit Breaker.
E. Connectors for Maintenance Bypass and Parallel Redundant function.
F. Battery Connector for connecting a Battery Pack
G. Cooling Fans
H. Terminal block for Input & Output power connection.
I. Option Slot 1 is for other option cards except the SNMP card and the
Programmable Relay card.
J. Option Slot 2 is for the SNMP card and the Programmable Relay card
only.
11
2.5.2 Isolation Transformer module (ED6000RMXFMR) rear panel
A. Connectors for Maintenance Bypass and Parallel Redundant function.
B. Terminal block for Transformer Output, UPS Output, and Utility Input.
C. L6-30R for UPS input connection.
D. Maintenance Bypass Switch.
2.5.3 Battery Pack module (EDBP6000RM) rear panel
NOTE:
The Output receptacle box is an option. Not all Battery Packs have the
Output receptacle box.
A. Battery connector for connecting to the UPS module.
B. DC circuit breaker.
C. Battery connector for Daisy Chaining additional Battery Packs or for
connecting an external charger.
D. Cable for connecting the power to the output receptacles.
E. Output receptacle box.
