M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 9
Version 1-2018
Route all other peripheral cables through the stand
Connect them to the MP5000A/J computer. Set the computer in upright
position.
Connect all the peripherals to the cables
Turn the computer on
Install operating system software (pre-installed if purchased with system)
Install software driver
’
s
Install application software
11.0 BIOS Introduction
The MP5000A/J has been integrated into a slew of motherboards for over two
decades. With the Setup program, you can modify BIOS settings and control the
various system features.
AMI’s BIOS ROM has a built
-in setup program that allows users to modify the basic
system configuration. This information is stored in battery-backed CMOS, so it retains
the setup information when the power is turned off.
11.1 BIOS Setup
Turn on the computer and check for the
“
patch" code. If there is a number assigned
to the patch code, it means that the BIOS supports your CPU. If there is no number
assigned to the patch code, please contact us to obtain an up-to-date patch code file.
This will ensure that your CPU’s system status is
valid. After ensuring that you have a
number assigned to the patch code, press <DEL> and you will immediately be allowed
to enter setup.
