M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 15
Version 1-2018
20.0 MPS Configuration
MPS Revision - allows you to select MPS (Multi-Processor Specification) version.
[ 1.4 ]
21.0 Smbios Configuration
SMBIOS SMI Support - SMBIOS SMI wrapper support for PnP function 50h-54h.
[ Enabled ]
22.0 USB Configuration
Legacy USB Support - Enables support for legacy USB. Auto option disables
legacy support if no USB devices are connected.
[ Enabled ]
USB 2.0 Controller Mode allows you to select HiSpeed(480Mbps) or FullSpeed
(12Mpbs).
[ HiSpeed ]
BIOS EHCI Hand-Off - This is a workaround for an OS without EHCI hand-off
support. The EHCI ownership change should be claimed by EHCI driver.
[ Enabled ]
Hotplug USB FDD Support - A dummy FDD device is created that will later be
associated with a hotplugged FDD. Auto option creates this dummy device only
if there is no USB FDD present.
[ Auto ]
22.1 USB Mass Storage Device Configuration
USB Mass Storage Reset Delay - Number of sends POST wait for the USB mass
storage device after start unit command.
[ 20 Sec. ]
Emulation Type - If Auto, any USB device less than 530MB will be emulated as a
floppy drive and the remaining as hard drives. Force FDD option can be used to
force a FDD formatted drive to boot as FDD (Ex. ZIP drive).
[ Auto ]
23.0 Advanced PCI/PnP Settings
Clear NVRAM - Set this value to force the BIOS to clear the Non-Volatile
Random Access Memory (NVRAM).The Optimal and Fail-Safe default setting is
No.
[ No ]
