M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 17
Version 1-2018
Bootsafe function allows you to enable or disable the bootsafe function.
[ Disabled ]
25.0 Security
Select Security Setup from the MP5000A/J Setup main BIOS setup menu. All
Security Setup options, such as password protection and virus protection are
described in this section. To access the sub menu for the following items, select
the item and press <Enter>:
Boot Sector Virus protection will warn if any program tries to write to the boot
sector.
[ Disabled ]
26.0 Advanced Chipset Settings-North Bridge
DRAM Frequency allows you to manually change DRAM frequency.
[ Auto ]
Configure DRAM Timing by SPD allows you to enable or disable detection by
DRAM SPD.
[ Enabled ]
Initiate Graphic Adapter allows you to select which graphics controller to use as
the primary boot device.
[ IGD ]
Internal Graphics Mode Select - Select the amount of system memory used by
the Internal graphics device.
[ Enabled, 8MB ]
26.1 Video Function Configuration
DVMT Mode Select displays the active system memory mode.
[ DVT Mode ]
DVMT/FIXED Memory - Specify the amount of DVMT / FIXED system memory to
allocate for video memory.
[ 256MB ]
Boot Display Device - Select boot display device at post stage.
[ VBIOS-Default ]
Flat Panel Type allows you to select which panel resolution you want.
[ 1024X768(24bit) ]
Spread Spectrum Clock allows you to enable or disable the spread spectrum
clock.
[ Disabled ]
Backlight Control 1/2 Type allows you to select backlight control type.
[ PWM ] [ Level 10 ]
Backlight 1/2 Level allows you to select backlight level.
[ PWM Level 10 ]
