M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 18
Version 1-2018
27.0 Advanced Chipset Settings-South Bridge
USB Functions - disabled, 2 USB Ports, 4 USB Ports, 6 USB Ports or 8 USB Ports
or 10 USB Ports.
[ 10 USB Ports ]
USB 2.0 Controller - enables or disables the USB 2.0 controller.
[ Enabled ]
LAN1 Intel 82576V controller - enables or disables the Intel LAN1 controller.
[ Enabled ]
LAN1 Boot ROM - enables or disables internal LAN1 boot.
[ Disabled ]
LAN1 Wake Up from S5 - enables or disables LAN1 wake up from S5 function.
[ Disabled ]
LAN2 Intel 82583V controller - enables or disables the LAN2 controller.
[ Enabled ]
LAN2 Boot ROM - enables or disables LAN2 boot.
[ Disabled ]
LAN2 Wake Up from S3/S4/S5 - enables or disables LAN2 wake up from S3/S4S5
function.
[ Disabled ]
HDA Controller - enables or disables the HDA controller.
[ Enabled ]
SMBUS Controller - enables or disables the SMBUS controller.
[ Enabled ]
SLP_S4# Min. Assertion Width is a signal for power plane control. This signal
shuts off power to all non-critical systems when in the S4 (Suspend to disk) or
S5 (Soft off) state. This setting indicates minimum assertion width of the
SLP_S4# signal to ensure that the DRAMs have been safely power-cycled.
[ 1 to 2 seconds ]
28.0 Exit Option
Save Changes and Exit - When you have completed system configuration, select
this option to save your changes, exit BIOS setup and reboot the computer so
the new system configuration parameters can take effect.
1.
Select Exit Saving Changes from the Exit menu and press <Enter>.
The following message appears: Save Configuration Changes and Exit Now?
[Ok] [Cancel]
2.
Select Ok or cancel.
